OEM Supply Garment Leather - 1.35mm thickness High Quality Practical Bulk Multifunction Artificial Synthetic Stocklot PVC Leather For Car inside decoration Placemat – POLYTECH

Material: PVC

Backing Technics: non-woven

Pattern: RIS

Use: Placemat Decorative, Chair, Car Seat

Feature: Waterproof, Anti-Mildew, Abrasion-Resistant, Press moldin

Thickness: 1.35mm or others

Place of Origin: FuZhou China

Brand Name: Polytech

Width: 1.3meter-1.5meter

Application: Decoration;Car seat

Surface: Decorative pattern

The bottom surface: Non woven fabric

key words 1: artifical leather

key words 2: PVC artificial leather

key words 3: cheap artificial leather

Port: FuZhou

Not only genuine leather needs carefully maintenance, PU leather also needs careful care to ensure long-term use.Different raw materials and physical properties determine the maintenance method of PU leather. The following is the general protection method of leather.

1. Maintaining PU leather. Spray the maintenance wax used for daily spray leather sofas on a clean and soft cotton cloth. Then wipe the surface of the PU leather, wipe all of it and hang it in a ventilated place. This can make the PU leather glow with its original luster.

2. If the PU leather is exposed to rain or water, it should be dried in time or wiped dry with a clean soft cloth, and hung to dry in a well-ventilated place to prevent the leather from becoming moldy due to moisture. When the PU leather is dirty, use a clean soft cloth to wipe off the dust, use a cotton cloth dipped in water to clean up the stains on the surface of the PU, and then dry it in a cool, ventilated place.

3. After PU leather is cleaned by hand or machine dry-cleaned, the leather must be colored, especially the areas where the leather is often rubbed, and the key must be treated, and the color must be evenly applied. After finishing the coloring, place it in a ventilated place to dry. After cleaning, place it in a ventilated place and dry it in the shade.

Because we are a customized factory, we need to meet your product needs 100%. This may involve several rounds of sending samples. We can send you existing products that meet the requirements, or you can send you Send us your samples, including your detailed requirements.